Arduino STC单片机远程升级(1)单机版文章目录Arduino STC单片机远程升级(1)单机版前言一、ESP32对STC进行单机升级二、使用步骤1.引入库2.需要烧写的单片机程序二进制数据3.主程序代码总结前言提示ESP32对STC进行单机升级随着越来越多得产品诞生难免会出现实验阶段测试不到得BUG一旦产品在现场出现问题解决起来较为繁琐本门主要介绍STC单片机如何通过远程进行升级固件…一、ESP32对STC进行单机升级1、在esp32中建立好STC单片机的程序烧写框架 2、定义程序代码数组来进行STC程序存储 3、烧写.....二、使用步骤1.引入库代码如下示例#includeArduino.h#includeWiFi.h#includeTicker.h#includeHTTPClient.h2.需要烧写的单片机程序二进制数据代码如下示例unsignedcharDEMO[15400]{//程序代码0x02,0x00,0x3D,0xE4,0xFD,0xFC,0xE4,0xFB,0xFA,0xC3,0xEB,0x9F,0xEA,0x9E,0x50,0x07,0x0B,0xBB,0x00,0x01,0x0A,0x80,0xF2,0x0D,0xBD,0x00,0x01,0x0C,0xBC,0x13,0xE7,0xBD,0x88,0xE4,0x22,0x75,0x96,0xFF,0xE4,0xF5,0x95,0xC2,0xA5,0xC2,0xA7,0x7F,0x64,0x7E,0x00,0x12,0x00,0x03,0xD2,0xA5,0xD2,0xA7,0x12,0x00,0x03,0x80,0xEC,0x78,0x7F,0xE4,0xF6,0xD8,0xFD,0x75,0x81,0x07,0x02,0x00,0x23,0x73,};3.主程序代码voidloop(){// // 如果ESP8266连接WiFi则发送HTTP请求// if ((WiFi.status() WL_CONNECTED)) {// esp8266Http();//先测试单机升级// }if(SCREAM_Download(DEMO,0x3c28)){//升级成功Serial.println(Upgrade succeeded!);}else{//升级失败Serial.println(Upgrade failed!);}}总结本文仅记录此次开发过程后续会更新最终版本。